T‑Grip is a high‑performance bed adhesive polymer designed to ensure successful FDM 3D printing. Powered by a temperature‑activated wax polymer, it creates a strong bond between the print and the build plate when heated, reducing warping and improving first‑layer adhesion. Once cooled, prints release effortlessly, leaving your build plate clean and ready for the next project.

Net Weight: 175g

• Temperature Activation: Effective from 60°C – 130°C, adaptable to a wide range of filaments.
• Versatile Compatibility: Works seamlessly on PEI, Glass, Aluminium, FRP, and Magnetic build plates.
• Multi‑Material Support: Optimized for PLA, PETG, ASA, ABS, Nylon, PC, PPS, and their Carbon Fiber composites.
• Easy Release: Prints pop off naturally after cooling to room temperature.
• Safe & Washable: Non‑toxic, water‑washable formula for easy cleanup.

1. Shake can well before use.
2. Hold upright ~20 cm from the build plate.
3. Spray a thin, even layer across the surface.
4. For slightly warped or uneven plates, apply a thicker layer for best results.

• Safe on skin but avoid eye contact.
• Store in a cool, dry place below 50°C.
• Extremely flammable, keep away from open flames.
• Do not puncture the can, even when empty.

Dimethylether, Laurylacrylates, Methacrylates Copolymer, Acrylates, Polyglyceryl, Ethylamide oxide, Butane, Isobutane, Propane (propellant), Alcohol, Water.